M
hardwood FLOOR refinishing Seattle
hardwood FLOOR INSTALLATION Seattle
M hardwood FLOOR refinishing Seattle hardwood FLOOR INSTALLATION Seattle
|
|
Need a quick quote or have a question ? click the link below or you can E-mail your request Direct to chris@hardwoodfloorseattle.com or you can call or fax your request Southend 253-631-0705 Fax 253-631-2805 Northend 206- 244-WOOD
Solid hardwood flooring is cut out from a solid piece of wood. When we think of a solid Hardwood floor we generally think of the standard strip oak Hardwood floor that is 3/4" thick by 2 1/4" wide, but solid Hardwood floors are also available in various sizes from 3 to 6 or more inches wide (called plank Hardwood floors). Custom Milled sizes less than 2-1/4 or wider than 6 inches wide are also available and are available in different thicknesses. The Hardwood flooring is generally in random lengths from 12" – 84", Custom Milled lengths can exceed 12’ long. The most common Hardwood floor species used for solid Hardwood floors are red oak, white oak, and maple, although they are available in many other Hardwood flooring species. Solid Hardwood floors are sensitive to moisture and it is not recommended to install these floors below ground level, or directly over a concrete slab. Solid Hardwood floors are for nail-down installations only, (with the exceptions of a few manufactures that state you can direct glue down 5/16 inch thick solid Hardwood flooring such as the Bruce Natural Reflections.) You can refinish, or recoat solid Hardwood floors several times, which adds to their appeal and to their long life. There are solid Hardwood floors that are well over 100 years old and are still in good condition. Q. What is the advantage of using a Solid Hardwood floor over the other types such as an engineered floating or glue down floors? A. 3/4 Solid Hardwood flooring has a thick 5/16 top wear layer that can be sanded and refinished new again up to 7 times and can last well over 100 years. Solid Hardwood flooring also adds structural strength to a floor system due to its 3/4 thickness and interlocking Tongue and Groove milling. If you have a wood sub floor you would most likely want to use a 3/4 solid Hardwood floor. Need a quick quote or have a question ? click the link below or you can E-mail your request Direct to chris@hardwoodfloorseattle.com or you can call or fax your request Southend 253-631-0705 Fax 253-631-2805 Northend 206- 244-WOOD
|
Hardwood floors Seattle Hardwood flooring contractor Seattle Hardwood floor Service Seattle Hardwood floor refinishing Seattle Hardwood floor installation Seattle Hardwood floor repair Seattle. Hardwood floor refinishing Seattle Hardwood floor prices Hardwood floors Seattle estimate Hardwood floor services Seattle Hardwood flooring products Seattle Site finished Hardwood floors Seattle Hardwood floor Seattle testimonials Hardwood floor care Seattle Prefinished Hardwood floors Seattle Hardwood floor Seattle buff and coat Engineered Hardwood floors Seattle Home Improvement Links Hardwood flooring links Site Map Moore Floors Inc, Provides Hardwood Flooring Services in Hardwood floors Seattle, Hardwood floors Bellevue, Hardwood floors Renton, Hardwood floors Kent, Hardwood floors Tacoma, Hardwood Floors Redmond, Hardwood floors Sammamish, Hardwood floors Auburn, Hardwood floors Tukwilla, Hardwood floors Newcastle, Hardwood floors Maple Valley, Hardwood floors Buckley, Hardwood floors Covington, Hardwood floors Everett, Hardwood floors Magnolia, Hardwood floors Enumclaw, Hardwood floors West Seattle, Hardwood floors North Seattle, Hardwood floors Mercer Island, Hardwood floors Bonney lake, Hardwood floors Gig Harbor, Hardwood floors Edmonds |
